Neon Keyboard Pt 2

After Getting the RCA Socket finished I went straight to getting the RCA Plug end done.
This was simple enough by getting the positive and negitive the same as the socket.

If you hadn't gathered the RCA is for powering the keyboard. Running off 12V is the hardest part I have to work out with this mod!

Now we have the fun part!

Open the keyboard and (as I found with this one) all the keys are sealed so I couldn't have any light coming up through them (as was my original plan) so I had to change that idea.
Getting my drill out (and yes it still is the only tool I have apart from my soldering iron) I drilled a 6mm hole in the top middle for the switch

And also drilling (in my case) Seven 4mm holes on either side of the keys.

On to page 3

Return to Mods

Lord Shaper